MG90S 180 degrees High Torque Metal Gear Micro Servo
MG90S High Torque Metal Gear Micro Servo are good for beginners who want to make stuff move without building a motor controller with feedback & gear box, especially since it will fit in small places. It comes with a 3 horns (arms) and hardware.
19 in stock
19 in stock
Delivery & Return
We want you to be happy with your purchase and we apologize if it is not. For whatever reason that you are not satisfied, we would be most happy to provide exchanges and returns for all items purchased from us if the following conditions are met.
Rules
All exchanges and returns would need to be raised within 10 days of the invoice date for Singaporeorders, and 20 days for overseas orders. For local deliveries, there is an option to exchange at any of our boutiques within Singaporeor through our online portal at www.company.com. All requests for returns however, would need to be strictly made online at www.company.com for both local and overseas deliveries.
Interpretation and Definitions
All exchanges and returns would need to be raised within 10 days of the invoice date for Singaporeorders, and 20 days for overseas orders. For local deliveries, there is an option to exchange at any of our boutiques within Singaporeor through our online portal at www.company.com. All requests for returns however, would need to be strictly made online at www.company.com for both local and overseas deliveries.
MG90S 180 degrees High Torque Metal Gear Micro Servo. The tiny little servo can rotate approximately 90 Degree Micro Servo (45 in each direction) and works just like the standard kinds you’re used to but smaller. You can use any servo code, hardware or library to control these servos. It is suitable for beginners who want to make stuff move without building a motor controller with feedback & gearbox, especially since it will fit in small places. Of course, it is not nearly as strong as a standard servo.
SPECIFICATION
- Size : 22.8 x 12.2 x 28.5 mm
- Voltage : 4.8V to 6V DC
- Weight: 16 grams
- Speed : 0.1 sec/60Â degrees (at 4.8V), 0.08 sec/60 degrees (at 6.0V)
- Stall Torque : At 4.8V: 2.1 kg-cm / 25 oz-in. At 6.0V: 2.4Â kg-cm / 30.5 oz-in
- Spline Count: 20
-
Wiring:
-
Brown = GND
-
RED = 5V
-
Orange = Signal
-
Note: that the default servo pulse widths (usually 1ms to 2ms) may not give you a full 180 degrees of motion. In that case, check if you can set your servo controller to custom pulse lengths and try 0.75ms to 2.25ms. You can try shorter/longer pulses but be aware that if you go too far, you could break your servo
PARTS LIST:
- MG90S 180 Degree Micro Servo x1
- Package includes gear horns and screws
Development Resources: demo codes, schematic, datasheets, etc
Notes:
1. There may be slight size deviations due to manual measurement, different measuring methods and tools.
2. The picture may not reflect the actual colour of the item because of different photographing light, angle and display monitor.
| Weight | 0.017 kg |
|---|---|
| Dimensions | 4.5 × 4.5 × 1.2 cm |
Q & A
Ask a question
Your question will be answered by a store representative or other customers.
Thank you for the question!
Your question has been received and will be answered soon. Please do not submit the same question again.
Error
An error occurred when saving your question. Please report it to the website administrator. Additional information:
Add an answer
Thank you for the answer!
Your answer has been received and will be published soon. Please do not submit the same answer again.
Error
An error occurred when saving your answer. Please report it to the website administrator. Additional information:
Related Products
