Ether IO24 R

NOTICE: EOL Notification for Ether IO24 R and Dip R

The Ether IO24 R connects to any Ethernet network supporting the UDP/IP protocol suite and can communicate with any point on that network. By connection with an Internet Router, the device can communicate with any Internet-connected device.

The Ether I/O 24 is an integrated, micro-controller based network interface board with 24 digital user I/O lines and an onboard switch-mode voltage regulator. The module’s firmware and hardware enable your devices or other modules to be connected to a generic Ethernet network and controlled or sensed using industry-standard protocols.

Each of the 24 User I/O lines operates at 5V DC maximum levels and can be independently programmed as an Input whose state can be remotely sensed via another network device, an Input whose state is internally checked and transmitted when a change occurs, or an output whose state can be remotely controlled by another networked device.

BOARD FEATURES:

• Ethernet to Digital I/O Interface
• 24 independently programmable signal lines with configurable CMOS, TTL or Schmitt Trigger thresholds and programmable pull-ups per line
• Supports UDP Commands, ARP, BOOTP, DHCP, ICMP
• SPI and I2C Interface on all three Ports
• Power-up Settings are stored on-board for easy configuration
• Programmable Fixed IP or Dynamic IP assignment from a DHCP server
• Easy connection to the I/O port via a 10-way box header that suits a standard IDC connector
• 72mm Standard width for DIN Rail Modules
• Can be connected to a wireless network gateway or access point for wireless operation
• Advanced configuration allows the modules to automatically scan the input ports and transmit changes directly to any host or another Ether IO24 module without a host connection.
• Integrated Switch Mode Voltage Regulator allows power from any 8-32V DC Power source.
• RoHS Compliant

Ether IO24 R Test and Programming Utility

Electrical Characteristics:

• Storage Temperature -65°C to +150°C
• Ambient Temperature (Power Applied) 0°C to + 70°C
• Power Input Voltage -1.0v to +35.00v DC
• DC Input Voltage – Inputs -0.6v to +5.6v
• Output Current – Outputs 45mA
• Output Current – Total all outputs 210mA
• Maximum DC current into an input pin ±500uA
• Power Dissipation 3W

Notes:

1. There may be slight size deviations due to manual measurement, different measuring methods and tools.
2. The picture may not reflect the actual colour of the item because of different photographing light, angle and display monitor.