Endstop Mechanical Limit Switches for 3D printer (without cables)
The basic operation of these endstops is to set the logical state of a pin in the ATmega (or other controller board) to indicate when the bound was reached.
$6.95
15 in stock
This item: Endstop Mechanical Limit Switches for 3D printer (without cables)
15 in stock
$6.95
$6.95
Delivery & Return
We want you to be happy with your purchase and we apologize if it is not. For whatever reason that you are not satisfied, we would be most happy to provide exchanges and returns for all items purchased from us if the following conditions are met.
Rules
All exchanges and returns would need to be raised within 10 days of the invoice date for Singaporeorders, and 20 days for overseas orders. For local deliveries, there is an option to exchange at any of our boutiques within Singaporeor through our online portal at www.company.com. All requests for returns however, would need to be strictly made online at www.company.com for both local and overseas deliveries.
Interpretation and Definitions
All exchanges and returns would need to be raised within 10 days of the invoice date for Singaporeorders, and 20 days for overseas orders. For local deliveries, there is an option to exchange at any of our boutiques within Singaporeor through our online portal at www.company.com. All requests for returns however, would need to be strictly made online at www.company.com for both local and overseas deliveries.
Description
Additional information
Q & A
Mechanical switch limit switch Endstop 3D printer (without cables) for uses a lever switch to detect when activated. The switch is wired up so that when activated, it pulls the signal to LOW. Instead of messing with flags or complicated light beam interruption, we use a mechanical switch.
The primary job of an end stop is to detect when an axis has reached a minimum or maximum bound. A mechanical end stop is the simplest type of endstop: a simple mechanical switch positioned to trigger when a RepRap’s axis reaches the end/start of its motion. Contact-less magnetic switches are called reed switches.
What is a limit switch for a 3D printer?
The Limit Switches tell the print head to stop when it reaches the edge of its gantry in the home position.
Features:
- Sensitive trigger relatively high precision. Small and exquisite, Low noize, high repeat positioning accuracy.
- Reliable performance durability.
- Small-sized, easy to install.
- Suit for 3d printer,
- Creality 3D
- Ender-3
- Ender-3 Pro
- CR-10
- CR-10S
- CR-10S Pro
- CR-S4
- CR-S5
- Tevo Tornado etc.
Specification
- Style: No Cable
- Material: Metal
- Max Voltage: 250V
- Max Current: 5A
- XH2.54 3PIN
- Service ambient temperature：0-40 ℃
- Service life:10000 hours
- Board size: 20x20x7mm
Package Included:
- 1 x Mechanical switch limit switch Endstop for 3D printer (without cables)
Development Resources: demo codes, schematics, datasheets, etc
Reference for Arduino and reference to all matters
https://reprap.org/wiki/Mechanical_Endstop
Notes:
1. There may be slight size deviations due to manual measurement, different measuring methods, and tools.
2. The picture may not reflect the actual colour of the item because of different photographing light, angles, and display monitors.
Related Products
| Weight | 0.010 kg |
|---|---|
| Dimensions | 2 × 2 × .7 cm |
Q & A
There are no questions yet
Ask a question
Your question will be answered by a store representative or other customers.
Thank you for the question!
Your question has been received and will be answered soon. Please do not submit the same question again.
Error
An error occurred when saving your question. Please report it to the website administrator. Additional information:
Add an answer
Thank you for the answer!
Your answer has been received and will be published soon. Please do not submit the same answer again.
Error
An error occurred when saving your answer. Please report it to the website administrator. Additional information:
